A properly installed architectural shingle roof is rated to withstand winds of 110 to 130 miles per hour, and some lines are rated to 150. Three-tab shingles are rated for about 60 to 70. Those numbers come from laboratory tests on new shingles nailed exactly to the manufacturer’s pattern, sealed in warm weather, on a sound deck. The roofs that lose shingles in a Tyler thunderstorm with 60 mile-per-hour gusts are usually not failing the test; they are failing the installation. Here is what the ratings mean and why real roofs come up short.
The ratings
Two ASTM standards cover shingle wind resistance:
- ASTM D3161 tests shingles in a wind tunnel. Class A passes at 60 mph, Class D at 90, Class F at 110.
- ASTM D7158 calculates uplift resistance. Class D is 90 mph, Class G 120, Class H 150.
Most architectural shingles sold in Texas carry Class F and Class H ratings, sometimes conditional on six nails per shingle rather than four. The rating is printed on the wrapper and in the product data sheet, and your estimate should name the shingle so you can look it up.
What the rating assumes
- Nails placed in the manufacturer’s nail zone, driven flush, not angled or overdriven.
- The specified number of nails, often six for the high-wind rating.
- Starter strip at the eaves and rakes with its sealant strip at the edge.
- The sealant strip on each shingle fully bonded to the shingle below, which requires warm sun after installation.
- Proper drip edge and a deck in good condition.
Miss any one of these and the roof’s real wind resistance drops well below the rating, often to the point where a routine spring storm lifts the edges.
How wind actually damages a roof
Wind does not push shingles off; it lifts them. Air moving over the roof creates suction, strongest at the edges, eaves, rakes, ridges and corners. A shingle whose sealant has not bonded, or whose nails are too high to hold the shingle below, lifts in a gust, creases along the nail line, and either tears off or lies back down bent. Creased shingles look fine from the ground and leak at the next rain.
Debris does the rest: limbs, shingles from a neighbor’s roof, and anything the wind carries will puncture or scrape the surface.
East Texas wind
Tyler’s wind damage comes mostly from thunderstorm outflow and straight-line winds in spring and early summer, occasionally from tornadoes, and from the outer bands of Gulf hurricanes. Gusts of 60 to 80 mph happen most years somewhere in Smith County. A roof installed to its rating handles that. A roof with high nails and unsealed shingles does not.
Signs of wind damage
- Missing or torn shingles, especially at rakes and ridges.
- Shingles lifted and laid back down, visible as a horizontal crease or a slightly raised row.
- Granules in gutters after the storm.
- Lifted ridge cap or hip shingles.
- Loose or missing flashing and lifted drip edge.
- A rattling or flapping sound in wind, which is unsealed shingles.
What to do after a windstorm
Do not get on the roof; creased shingles break underfoot. Photograph what you can see from the ground, note the date, and get an inspection. Advantage Roofing Company offers free, same-day storm inspections in Tyler. Wind damage is covered by most homeowners policies as a sudden event, and the same claim rules as hail apply: document early, have your roofer at the adjuster’s inspection, and pay your deductible yourself.
Making a roof reach its rating
When Advantage replaces a roof, the crew nails to the manufacturer’s high-wind pattern, installs starter strip with sealant at every eave and rake, uses new drip edge, and in cool weather hand-seals shingles where needed so they do not wait for a warm day that may come after the next storm. That is why we can offer a lifetime workmanship warranty on qualifying installations: the roof is built to its rating, not to the brochure.
Have your roof’s wind resistance checked
If your roof has lost shingles more than once, the problem is on the roof, not in the weather. Call Advantage Roofing in Tyler at (903) 939-3168 or schedule a free inspection.