What Is a Roofing Square? How Roofers Measure Your Roof

A roofing square is 100 square feet of roof surface. If a roofer tells you your roof is “30 squares,” it has about 3,000 square feet of surface to cover. Nearly everything on a roofing estimate is priced per square, so understanding this one unit lets you check an estimate’s math and compare quotes from different Tyler companies on equal terms.

Why roofers do not use your home’s square footage

Your home’s floor area is measured flat. Your roof is sloped, hangs past the walls, and often covers porches and garages that are not in the living area. All of that adds surface. A single-story 1,800 square foot home with a moderate pitch and generous overhangs can carry 2,400 or more square feet of roof, while a two-story home with the same floor area has a smaller roof because the second floor sits on top of the first.

How the measurement is done

On the roof

The traditional way is a tape measure and a notepad: measure the length and width of each roof plane, multiply, add them together, and divide by 100. Hips, valleys and dormers get measured as separate planes.

From the air

Most roofers today, Advantage included, use aerial measurement reports built from satellite and aircraft imagery, often checked with a drone flight. These reports map every plane, ridge, hip, valley, eave and rake, and calculate the area to within a few percent. They also give the lengths of every edge, which matter because drip edge, starter strip, ridge cap and valley metal are priced by the linear foot, not by the square.

Pitch factor

Pitch is the rise of the roof over a 12-inch run. A 4/12 roof rises 4 inches per foot. The steeper the pitch, the more surface sits above the same footprint. Measuring software applies a pitch multiplier automatically; a roofer working from the ground with the home’s footprint has to apply it by hand, and that is where ground-level estimates go wrong.

Waste factor

Shingles come in bundles, and bundles get cut at every hip, valley, rake and penetration. A simple gable roof may waste only a few percent of its material. A roof with many hips and valleys can waste 15 percent or more. Estimates add a waste factor on top of the measured squares, so a 28-square roof may be ordered as 31 or 32 squares of shingles. Ask what waste factor was used if two quotes disagree on material quantities.

Bundles per square

Most architectural shingles take three bundles per square; some heavier premium lines take four or more. Three-tab shingles are also three bundles per square. Knowing this lets you sanity check a material list: 30 squares of a three-bundle shingle is roughly 90 bundles before waste.

What else is priced per square

  • Tear-off labor and disposal.
  • Underlayment, usually sold in rolls that cover a set number of squares.
  • Installation labor.
  • Decking, when it needs replacement, is priced per sheet instead.

Items priced per linear foot include drip edge, starter, ridge cap, hip and ridge vent, step and counter flashing, and gutters. Items priced each include pipe boots, box vents, turbine vents, skylights and chimney flashing kits.

How to read your Advantage estimate

Our free estimates list the measured squares, the shingle line and color, each accessory with its quantity, the labor, the tear-off and haul-away, and a stated per-sheet price for any decking that turns out to need replacement. The written report also includes photos from the inspection. That level of detail is deliberate: a roof is a large purchase and you should be able to see exactly what you are buying.

Want your roof measured?

If you are planning a replacement, or just want to know what you have up there, the inspection and estimate are free. Call Advantage Roofing Company in Tyler at (903) 939-3168 or book online. You can also get a rough starting figure from the instant quote tool on our Tyler roof replacement page.

Residential

If you're building a home or office, trust Advantage Roofing with your shingle roof installation

Commercial

If your flat roof is leaking, don't take time out of your busy schedule to attempt a DIY repair job.

Storm Damage

When your property has weathered a storm, you can count on Advantage Roofing Company!

Gallery

Take a moment to view our past projects.